I’m just trying to install the scripts, however installation process hangs, apparently while starting argononed.service (line 348). Executing ‘sudo systemctl start argononed.service’ on the command line also hangs, so this may be the source of the problem. Any ideas how to overcome this issue?
My setup:
Raspberry Pi 4B 4GB
Raspberry PI OS lite, 64bit, fresh install, fully updated (as of 2023-08-09)
installation is started from a user , (however with UID 1000, i.e. the renamed user ‘pi’)
Inspired by this post, I took a look at the unit files argononed.service and argoneond.service. There appears to be a mistake, which looks like a likely cause for the lockup - here’s the original argoneond.service unit file:
Description=Argon EON RTC Service After=multi-user.target
[Service]
Type=simple
Restart=always
RemainAfterExit=true
ExecStart=/usr/bin/python3 /etc/argon/argoneond.py SERVICE
#ExecStopPost=/usr/bin/python3 /etc/argon/argoneond.py SHUTDOWN
[Install] WantedBy=multi-user.target
If multi-user.target must be reached before start of the service, and on the other hand the service should be started as part of the same target, this asks for trouble I’d guess.
I’ve changed the ‘After’ line to After=boot-complete.target.
I also did similar modification to argononed.service.
This seems to fix the problem - mot much testing done though yet.
Hi. I’m loving the mods. Its much easier to configure and the status commands are great.
I’m wondering - is there a way to exclude a specific disk from temperature monitoring or set a different cooling profile per device?
The problem I am specifically trying to solve is that my cooling fan almost always runs pretty much flat out. I have an external disk which runs hotter than I’d like (although totally stock and how WD intended it). I think the hot external USB drive is reporting that it is hot and the fan is spinning up to try to cool it but of course having no effect. My theory is that if I can either exclude the usb external disk from the monitoring, or somehow set its temperature to report colder than it is, I can avoid the unnecessary fan noise, whilst leaving a sensible cooling profile for the 2 internal disks.
Thank you so much for this script and this thread! It saved my sanity (as I have the Eon next to me). The fan noise was killing me, but now it’s allright.
Also, I got this neat fan to simply place under the Eon… will post that on the temperature thread.
Updated the code for bookworm… I am having a hard time creating a microSD at the moment (all of mine are failing…) so I tested on a non-EON. Script downloaded everything, and it appears functional.
Please retry and let me know if something is not working,