Hello,
It’s been a while, but I could never get to work the fan control, neither on the RasPi4, neither on RasPi 5… 100% always worked just fine.
Not sure if any of you can help me, but I tried several github repo apps, but none of them worked.
I’ve even tried : Files · 0.5.x · DarkElvenAngel / Argon One Daemon · GitLab
For example, I don’t think this looks any good, in the first place?
RasPi 5
marcell@raspberrypi:~$ i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
/etc/argononed.conf
#
# Argon One Fan Speed Configuration
#
# Min Temp=Fan Speed
fans = 35, 45, 80
temps = 30, 40, 65
hysteresis = 5
flags = 0x04
With the Raspi 4 I think there was a short with the previous owner or whenever I installed it in the case.
marcell@raspberrypi4:~$ i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 08 09 0a 0b 0c 0d 0e 0f
10: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
20: 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
30: 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
40: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
50: 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
60: 60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
70: 70 71 72 73 74 75 76 77
Either way, no matter what do I do, they just won’t spin up based on their temps.
I would appreciate any help!
Marcell