I added the NVMe case to the Argon One V2 case with a Raspberry Pi 4B, with a 1TB SSD installed (tested it with Cricual, Micron and Phison’s SSDs), I am running Raspberry OS Lite x64, and with the Pi idle, no load, I get OS constant notification of low voltage, I am using the official CanKit usb-c adapter with 5.1V 3.5A, this issue never happened with the Argon One V2 case standalone, I have 3 Argon cases with 3 Pi 4B all work fine without the NVMe expansion, as soon as I added it, I start getting the under-voltage notifications, any suggestion how to address this? Thanks
I had issues with a CanaKit power supply with my Argon ONE V2 M.2 SATA system. The slightest power flicker would cause the system to reboot (and the system is on a UPS). I switched to the Argon power supply and the problem went away.