Argon V2 Script for Android

[ktechnix]

Please refer to the following post responses:

Fan control:

Argon One V3 script for LineageOS

You are going to have to use a script to monitor the fan. First install Magisk so that you can add scripts to startup. Then boot into normal mode, goto settings - system - developer options and enable adb. Once enabled connect through adb with root access and put the script below in /data/adb/service.d/argon_fan.sh argon_fan.sh #!/system/bin/sh sleeptime=120 while true do cputemp=$(cat /sys/class/thermal/thermal_zone0/temp) if [[ $cputemp -lt 55000 ]]; then fanspeed="0x00" elif [ $cputemp -…

IR control:

Argon One V3 script for LineageOS

One more tidbit I figured I would share as this took some time to understand to get working. If you want to also control LineageOS with the IR receiver included in the V3 case, do the following: Create a unix file (Not with windows line endings) called rc_keymap.txt with the following data: # table argon, type: NEC 0x9c KEY_POWER 0xca KEY_UP 0xd2 KEY_DOWN 0x99 KEY_LEFT 0xc1 KEY_RIGHT 0x80 KEY_VOLUMEUP 0x81 KEY_VOLUMEDOWN 0xce KEY_OK 0xcb KEY_HOME 0x9d KEY_MENU 0x90 KEY_BACK Boot into recov…

Hope this helps!